Polyresin bathroom accessory manufacturers tell you that resin handicraft ornaments are fragile items. Maybe one accidentally ran into it. It is also broken, broken, and large areas of damage are generally discarded directly. But what if there are only a few small scars? What can we do about it? For broken resin handicraft ornaments. How should we fix it? Resin handicraft decoration manufacturers teach you how to rescue.

Repair method:
1. At room temperature (25°C), apply glue A and glue B at a visual ratio of 1:1 or apply glue A to one adhered part and glue B to the other. Then stick together, do 2-3 times of running-in before and after, fix it for 5-10 minutes!
2. At room temperature (25°C), mix glue A and glue B at a ratio of 1:1 by visual inspection with a plastic-coated sheet and immediately apply it to the surface to be bonded. Polyresin bathroom accessory manufacturers tell you to fix it for 5-10 minutes to basically position it. (Do not mix a large amount of glue at one time). And the glue can use the strength after 30-50 minutes of lamination, and can be used in the environment of -60°C-100°C!
3. The latter method is to find the manufacturer of the purchase for remedy!
Polyresin bathroom accessory manufacturers tell you that epoxy resin AB glue can be used to bond our resin handicraft ornaments. But how well it sticks depends on everyone's own craftsmanship! In fact, as long as you are careful and careful, it is very simple!
Epoxy resin AB glue. Polyresin bathroom accessory manufacturers tell you that it is a two-component epoxy resin adhesive, which not only has the high bonding strength, high hardness, and high chemical resistance of ordinary epoxy resin adhesives, but also has an anti-yellowing effect. Moderately dry, safe and environmentally friendly.