Polyresin bathroom accessory manufacturers tell you about resin handicraft finishing mold methods and failure pouring out of molds, use substitutes to grind the bottom, trim embryos, repair, sand, determine whether the molds are accessories, and whether the molds cannot be removed from the outside, whether to fill oil and soil, Whether the resin handicraft model can achieve the effect of the template.

1. It is better to use the generation to make the model if the model is reduced by 0.1mm every generation.
2. If the mold is not degreased, it will affect the surface smoothness and production quality.
3. The mold type sometimes needs to be made into accessories, and the clamping positions of the accessories should be suitable and the positions of the interfaces should be properly matched.
4. The Polyresin bathroom accessory manufacturer tells you that the mold type must not have bad problems such as drawing, burning, granulation, pores, and deformation.
5. There is a large difference between the mold type and the template, which may be caused by the shrinkage of the mold type.
6. The Polyresin bathroom accessory manufacturer tells you whether the mold can be replenished with oil and soil if the depth of the mold cannot be released.
7. The mold type requires that the smooth parts should be sanded, and the type of sand should be used according to the mold type requirements.
8. The effect of the model cannot be different from that of the template.
9. The Polyresin bathroom accessory manufacturer will tell you whether to add a mold line protective layer where the mold is easy to be wrong. The mold line protection layer is added according to the requirements of the mold type.